Fargo DTC1000 plastkortprinter ensidig printserver, mag kod Vis større

Fargo DTC1000 plastkortprinter ensidig printserver, mag kod



Mer informasjon

Fargo DTC1000

(47030 Base Model + Ethernet* with Internal Print Server + ISO Magnetic Stripe Encoder)

Fargo DTC1000 erstatter Fargo sin forrige modell, Persona C30e. DTC1000 har et meget brukervennlig design og benyttes i skoler, bedrifter og industri som behøver en kostnadseffektiv kortproduksjon.

Printeren leveres med USB interface med mulighet for nettverkskobling som tilleggsutstyr.

Leveres med 2 års garanti!



Print Method    
Dye-Sublimation / Resin Thermal Transfer

300 dpi (11.8 dots/mm) continuous tone

Up to 16.7 million / 256 shades per pixel
ƒ        Full-color with resin black  and overlay panel, YMCKO*, 250 prints
ƒ        Full-color half-panel with resin black  and overlay panel, YMCKO*, 350  prints
ƒ        Full-color with two resin black  panels  and overlay panel, YMCKOK*,  200 prints

Print Ribbon Options
ƒ        Resin black  and overlay panel, KO*, 500 prints
ƒ        Dye-sublimation black  and overlay panel, BO*, 500 prints
ƒ        Resin black  (standard and premium), 1000  prints
ƒ        Resin green,  blue, red, white, silver  and gold,  1000  prints
ƒ        Rewrite technology - No ribbon is required

Print Speed**    
7 seconds  per card  (K*); 
12 seconds  per card  (KO*); 
24 seconds  per card (YMCKO*);
31 seconds  per card  (YMCKOK*)

Accepted Standard  Card Sizes CR-80  (3.375˝L x 2.125˝W / 85.6mmL x 54mmW); CR-79 Adhesive Back (3.313˝L x 2.063˝W / 84.1 mm L x 52.4 mm W)

Print Area CR-80  edge-to-edge (3.36˝L x 2.11˝W / 85.3 mm L x 53.7 mm W); CR-79 (3.3˝L x 2.04˝W / 83.8 mm L x 51.8 mm W)
Accepted Card Thickness     .009˝ - .040˝ / 9 mil - 40  mil / .229mm - 1.016mm
PVC or polyester cards  with polished PVC finish;  monochrome resin required for100% polyester

Accepted Card Types optical memory cards  with PVC finish;  rewrite
Input Hopper  Card Capacity      100 cards  (.030˝ / .762 mm)
Output  Hopper  Card Capacity      Up to 30 cards  (.030˝ / .762 mm)
Card Cleaning     Card cleaning roller integrated into  ribbon cartridge; cleaning roller is
automatically replaced with each ribbon change
Memory     32 MB RAM
Software  Drivers     Windows®  XP / Vista™  (32 bit & 64 bit) / Server  2003 & 2008/ Windows®  7 / MAC OS X 10.5/10.6 / Linux***
Interface    USB 2.0, optional Ethernet with internal print server
Operating Temperature    65° to 80°  F / 18° to 27° C
Humidity    20–80%  non-condensing

Single-Sided Printer: 8.8˝H  x 13.7˝W x 7.9˝D  / 224 mm H x 348 mm W x 201 mm D
Dual-Sided Printer: 9.8˝H x 18.7˝W x 9.2˝D  / 249 mm H x 475 mm W x 234 mm D

Weight    Single-Sided: 7.5 lbs / 3.4 Kg; Dual-Sided: 10 lbs / 4.54 Kg
Safety:  UL 60950-1, CSA C22.2 (60950-1), and CE; EMC: FCC Class A, CE (EN 55022 Class A, EN

Supply Voltage    100-240Vac, 50-60Hz, 1.6 Amps  max.
Supply Frequency      50 Hz / 60 Hz
Warranty    Printer – Two  years; Printhead – Two  years, unlimited pass with UltraCard™

Encoding Options

125 kHz (HID Prox) reader;  13.56 MHz (iCLASS®, MIFARE®, ISO 14443 A/B, ISO 15693) read/write


Card Encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart  cards  (T=0,  T=1) as well as synchronous cards; ISO Magnetic Stripe Encoding, dual high-  and
low-coercivity, Tracks 1, 2 and 3
Single Wire  Ethernet and USB 2.0 interface for inline  printing and encoding (note: single  wire  
Ethernet encoding is only available for iCLASS®  and contact smart  card  encoding); Dual-Sided
Printing Module;  Smart  Card Encoding Modules(contact/ contactless); Magnetic Stripe Encoding
Module;  Printer Cleaning Kit; Ethernet with Internal Print  Server; Secure Proprietary Consumables

Software      Swift ID™  Embedded Badging Application, FARGO Workbench Diagnostic Utility with
Color  Assist spot-color matching
Display     Color  changing status  buttons

* Indicates the ribbon type and the number of ribbon panels printed where  Y=Yellow, M=Magenta,
C=Cyan, K=Resin Black, O=Overlay, B=Dye Sublimation Black.
** Print  speed  indicates an approximate print speed  and is measured from the time  a card  drops into  the output hopper to the time  the next card drops into  the output hopper. Print speeds do not include encoding time  or the time  needed  for the PC to process  the image. Process time  is dependent on the size of the file, the CPU, amount of RAM and the amount of available  resources at the time  of the print.
***Linux versions:  Ubuntu 8.04/9.04, Red Hat 5, Fedora 7/8/9/10/11, Open Suse 10.3, Debian  
5.03/5.04, Mandiva one 2009