Strekkodeleser Serie  (Opptil 150mm leseravstand) Vis større

Strekkodeleser Serie (Opptil 150mm leseravstand)



Mer informasjon

Strekkode leser med serieport tilkobling.

Opptil 15 cm leseravstand.

Leseren kan konfigureres til og lese kontinuerlig eller ved knapp på leser. Samt mange andre konfigurasjonsmuligheter.

The scanner offers excellent scanning performance at an attractive, entry-level price. The scanner reads from contact to 150mm from the barcode and provides accurate decoding in seconds. This scanner features ultra-low power consumption and an all-in-one universal host interface.

? Light Weight, Ergonomic Design

? Gerneral Purpose reader - a signle device
covering the broadest range of application

? Durable - without any moving parts to wear out

? 100 scans per second and working range from
contact to 150mm on medium density barcodes

? Excellent Scanning Performance starting at
0.1mm (4 mil)

? Readable Under Sun Light

? Reliability
(1) Trigger: 1,000,000 times
(2) Cable: 320,000 times (90°)
(3) Drop: 1.5 meter

Light source
660nm Visible Red LED
Optical system
2048 pixel CCD(Charge-coupled device)
Depth of scan field
150 mm(Code 39, PCS = 90%, 20mils)
Scanning width
75 mm at contact
Scan speed
100 scans/sec
Current - sleep mode
0.1 mm (4mils) Code39, PCS = 90%, on contact
Print contrast
45% or more (30% programmable)
Scanning angle
Front: 60° ,Rear: 60° ,Yaw: 75°
Decode capability
Auto discriminates all standard barcode;
Other symbologies can be ordered optionally
Cable - universal type
Beeper operation
7 tones or no beep
Blue LED
182 mm
26 mm
90 mm
49 mm
35 mm
120 g (cable not included)
Cable - K/B wedge
Connector type
RJ-45 phone jack connector
Case material
Shock resistance
Input voltage
5 VDC ± 0.25V
Power - operating
Power - standby
300 mW
Current - operating
250 mA @ 5 VDC
Current - standby
60 mA @ 5 VDC
Operating Temperature
0°C to 45°C (32°F to 113°F)
DC transformers
-20°C to 60°C (-4°F to 140°F)
5% to 90% relative humidity, non-condensing
Light level
Up to 20000 Lux
1.5m drop onto concrete
Programming method
Manual (Reading special barcode)
DOS command through RS-232
Program upgrade
Programmable characteristics
Code type selection, check digit selection decoding option transmitted character delay header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection keyboard emulation type (intermessage delay, keyboard type and keyboard language).Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits)