Strekkodeleser Serie (Opptil 250mm leseravstand) Vis større

Strekkodeleser Serie (Opptil 250mm leseravstand)



Mer informasjon

Strekkode leser med Serie porttilkobling.

Opptil 25 cm leseravstand.

Leseren kan konfigureres til og lese kontinuerlig eller ved knapp på leser. Samt mange andre konfigurasjonsmuligheter.

The long range scanner is suitable for a wide range of applications, from retail checkout and inventory management, to invoicing in offices and shipping/receiving control in factories. This long range model delivers fast and accurate reading of PDF codes, Code 16K as well as all standard linear symbologies. The scanner provides users with many benefits, including a 200mm scanning range, small size, and cost effectiveness. The scanner offers an all-in-one universal host interface, and a Windows utility is included.

? Gerneral Purpose reader - a signle device
covering the broadest range of application

? Durable - without any moving parts to wear out

? Plug and play connectivity - All popular interfaces
are on board KBW /USB/RS-232

? 200 scans per second and working range from
contact to 250mm on medium density barcodes

? Support PDF417 decoding

? Aiming line- Aiming line for easy-of-use in
scanning barcode

? Excellent Scanning Performance starting at
0.1mm (4 mil)

? Readable Under Sun Light

? Reliability
(1) Trigger: 1,000,000 times
(2) Cable: 320,000 times (90°)
(3) Drop: 1.5 meter

Light source
660 nm visible red LED
Optical system
2048 pixel CCD (charge-coupled device)
Depth of scan field
0-250 mm
Scanning width
120 mm
Scan speed
200 scans/sec
Current - sleep mode
25 mA @ 5VDC
0.1mm (4mils) - Code 39,PCS=45 %, on contact
Print contrast
30% or more
Scanning angle
Front: 60° ,Rear: 60° ,Yaw: 75°
Decode capability
Autodiscriminates all standard barcodes; other symbologies can be ordered optionally (2D Symbology for AS-8250)
Cable - universal type
Straight 2.3 m
Beeper operation
7 tones or no beep
Green LED
182 mm
Cushion material
26 mm
74 mm
51 mm
35 mm
150 g (cable not included)
Cable - K/B wedge
Straight 2.0 m
Connector type
RJ-45 phone jack connector
Case material
ABS plastic
Shock resistance
0°C to 40°C (32°F to 104°F)
Input voltage
5 VDC ± 0.25V
Power - operating
900 mW
Power - standby
500 mW
Current - operating
180 mA @ 5 VDC
Current - standby
100 mA @ 5 VDC
DC transformers
Class 2; 5VDC @ 450 mA
-40°C to 60°C (-40°F to 140°F)
5% to 90% relative humidity, non-condensing
Light level
Up to 80000 Lux
1.5m drop onto concrete
Programming method
Manual (reading special barcode) DOS command through RS-232, Windows configuration program
Sealed to resist airborne particulate contaminants
Program upgrade
Enabled by build-in flash memory
Programmable characteristics
Code type selection, check digit selection Decoding option Transmitted character delay, Header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection Keyboard emulation type (intermessage delay, keyboard type and keyboard language).Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits)
Agency Listing
*This data sheet is for informational purposes only. Argox makes no warranties, expressed or implied in this summary. Specifications are subject to change without notice. All trademarks are the property of their respective owners. More specific information, please refer to user’s manual.